|
|
Product Details:
|
| Clamping Force: | 400T | Cylinder Diameter: | φ285mm |
|---|---|---|---|
| Qty. Of Cylinder: | 4 Sets | Plunger Stroke: | 400mm |
| Heating Plate Size: | 900*1500*60mm | Heating Method: | Electric Heating / Oil Heating |
| Plates Daylight: | 200mm | Control Mode: | Relay Automatic Control |
| Operating Voltage: | 380V 50HZ 3Phase Or Customized | ||
| Highlight: | rubber vulcanizing machine,rubber vulcanizing equipment |
||
Hot sale 400T pressure 2 working layers Rubber Hydraulic Molding Press Machine, Rubber Fender Molding Machinery
This Rubber hydraulic molding press machine is a frame structure machine. It consists of 4sets hydraulic cylinder, 4pcs frame plates, 3pcs heating plates, 1 fixed bolster & 1 moving bolster, 1 hydraulic station and 1 electric control box.
Rubber hydraulic molding machine is mainly used for molding&vulcanizing rubber/silicone/synthetic rubber etc. like Rubber seals, O-rings, Rubber gaskets, insulation mats, bullpen mats etc. It is also suitable for molding polyurethane and plastic products, like HDPE plates etc.
Machine Specifications:
| Model | XLB-D900×1500×1/4.00MN |
| Total Pressure | 400T |
| Heating plate size | 900×1500×60mm |
| Unit Area Pressure | 29.6kg/cm2 |
| Amount of hydraulic piston | 4 sets |
| Working Hydraulic Pressure | 16Mpa |
| Amount of working layer | 2 |
| Daylight | 200mm |
| Plunger stroke | 400mm |
| Structure | Frame type |
| Heating method | Electrical heating |
| Mould closing speed | ＞12mm/s |
| Control mode | Relay control |
Machine introduction:
Effective synchronizing mechanism:
Reasonable hydraulic oil circuit design ensures the same flow for of each cylinder.
Good design guide and support structure:
The heating plates has T-shape slot for fixing mould:
Packaging of Rubber vulcanizing press machine:
We can design & make equipments according to your machine requirement or product size!
Contact Person: Mr. LEE
Fax: 86-532-83197554
