|Clamping Force:||160T||Product Name:||Rubber Vulcanizing Press Machine|
|Unit Area Pressure:||44.4kg/cm²||Plates Daylight:||300mm|
|Plunger Diameter:||φ360mm||Application:||Rubber Sole Making Machine|
|Plunger Material:||Chilled Cast Iron||Control Mode:||Fully Automatic Control|
160T Rubber Vulcanizing Press Machine,
Vulcanizing Press Rubber Sole Making Machine,
160T Rubber Sole Making Machine
160T Rubber Vulcanizing Press Machine Rubber Sole Making Machine
-High speed open/close molds, high production efficiency.
-Automatic in/out mold and ejector device, low labor strength.
-Optional normal valve or proportional valve, advanced oil way matching, reduce energy consumption.
-The electric system adopt PLC programming control, which is easy to be operated.
Rubber Vulcanizing Press Machine is used for vulcanizing various kinds of rubber and plastic mould products as well as non-mould products. Like rubber railway sleeper, rubber seals, O-ring, rubber gasket, Condenser seal, rubber-steel bonded products, rubber mats, rubber tiles, rubber conveyor belts, silicone rubber products and synthetic rubber products etc.
1) It has 4-columns structure and frame structure, as a below pressing type(upwards), the heating plate opens by the self-weight of the hot plate, platform and plunger.
2) The plate size, piston stroke and total pressure can be adjusted according to customers’ actual requirement, the machine can equip with manual-pull mold and automatic hydraulic-pull mold, which reduces labors’ working strength and inconvenience.
3) This machine has three kinds of control method: manually, semi-auto. and full auto.
4) Fast speed mould-closing, high production efficiency, low locking speed to protect mould.
5) Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance.
|Total Pressure (MN)||25T||50T||100T||160T|
|Platen size (mm)||350*350||400*400||600*600||600*600|
|Plate Distance (mm)||125||125||125||300|
|Working Layer NO.||2||2||2||1|
|Unit Area Pressure(Mpa)||2.04||3.13||2.77||4.4|
|Plunger Stroke (mm)||250||250||250||400|
|Motor Power (kw)||2.2||2.2||2.2||3|
|Overall dimension: (L×W×H) (mm)||1400×480×1380||1600×500×1480||1880×720×1680||2250×1200×2200|
Main parts instruction for plate & vacuum rubber machine
|1||Motor||Taiwan Tatung||Large torque type, quiet and silent|
|2||Oil Pump||Japan branch||Collective style circuit design|
|3||PLC||Japan Mitsubishi||Independent written, easy to operate|
|4||LCD touch screen||Taiwan PanelMaster||Clear and intuitive, convenient, easy to operate|
|5||Heating pipes||Taiwan branch||Nickel-chromium alloy wire, never rust|
|6||Oil seal||Japan NOK||Wear-resistant, durable, no leakage|
|7||Solenoid valve||Taiwan Victoria||Controlled fast, long life|
|Japan Fujitsu, Great
Wall, Chint and so on
|Performance and stability|
|9||Thermostat||Omron||Using PID correction, temperature uniform
distribution, the error value at ± 3 ºC
|10||Pressure sensor||Denmark TRAFAG||Conduction pressure accurate, unbiased, and easy
|Taiwan Solid State
|temperature uniform distribution, the error value
at ± 3 ºC
|12||Machine body casting||FCD50 Ductile Iron||Aging passivation, high tensile strength|
|13||Column||Carbon Steel||Hardness up to HRC55--58|
|14||Work plate||Size as per quotation||45 # high carbon steel, grinding, surface nitriding hardness HRC50-55|
|15||Machine Middle body||Umbrella tapered design||Make the machine rise and fall by force, the mold cavity pressure evenly, the product is not lack of material, no bubbles|
|16||Vacuum Pump||Germany Busch||Evacuated quickly, can reach 760 mm Hg within 5 seconds|
Contact Person: LEE