|
Product Details:
|
| Clamping Force: | 400T | Cylinder Diameter: | φ285mm |
|---|---|---|---|
| Qty. Of Cylinder: | 4 Sets | Plunger Stroke: | 400mm |
| Heating Plate Size: | 900*1500*60mm | Heating Method: | Electric Heating / Oil Heating |
| Plates Daylight: | 200mm | Control Mode: | Relay Automatic Control |
| Operating Voltage: | 380V 50HZ 3Phase Or Customized | ||
| High Light: | 500*500mm Rubber Vulcanizing Press,400T Rubber Vulcanizing Press Machine |
||
80T Pressure 500*500mm Rubber Vulcanizing Press Machine with Automatic Mould Sliding Device
Rubber hydraulic molding machine is mainly used for molding&vulcanizing rubber/silicone/synthetic rubber etc. like Rubber seals, O-rings, Rubber gaskets, insulation mats, bullpen mats etc. It is also suitable for molding polyurethane and plastic products, like HDPE plates etc.
Machine Specifications:
| Model | XLB-D500×500×1/0.80MN |
| Total Pressure | 80T |
| Heating plate size | 500×500×56mm |
| Unit Area Pressure | 32kg/cm2 |
| Amount of hydraulic piston | 1 set |
| Working Hydraulic Pressure | 16Mpa |
| Amount of working layer | 1 |
| Daylight | 300mm |
| Plunger stroke | 300mm |
| Structure | Four column type |
| Heating method | Electrical heating |
| Mould closing speed | ＞12mm/s |
| Control mode | Relay control with automatic mould sliding plate |
Machine introduction:
The heating plates has T-shape slot for fixing mould:
Our Workshop:
Packaging of Rubber vulcanizing press machine:
We can design & make equipments according to your machine requirement or product size!
Contact Person: Mike
Tel: +8618669746703
