|Clamping Force:||160T||Heating Plate Size:||600*600mm Or Customized|
|Unit Area Pressure:||44kg/cm²||Plates Daylight:||300mm|
|Plunger Diameter:||φ360mm||Plunger Stroke:||300mm|
|Cylinder Material:||Nodular Cast Iron||Plunger Material:||Chilled Cast Iron|
|Control Mode:||PLC Fully Automatic Control|
rubber vulcanizing machine,
rubber vulcanizing equipment
160T PLC automatic control Rubber Seal Hydraulic Vulcanizing Press Machine with automatic molding sliding out
Rubber Hydraulic Vulcanizing Press Machine is used for vulcanizing various kinds of rubber and plastic mould products as well as non-mould products. Like rubber railway sleeper, rubber seals, O-ring, rubber gasket, Condenser seal, rubber-steel bonded products, rubber mats, rubber tiles, rubber conveyor belts, silicone rubber products and synthetic rubber products etc.
1) It has 4-columns structure and frame structure, as a below pressing type(upwards), the heating plate opens by the self-weight of the hot plate, platform and plunger.
2) The plate size, piston stroke and total pressure can be adjusted according to customers’ actual requirement, the machine can equip with manual-pull mold and automatic hydraulic-pull mold, which reduces labors’ working strength and inconvenience.
3) This machine has three kinds of control method: manually, semi-auto. and full auto.
4) Fast speed mould-closing, high production efficiency, low locking speed to protect mould.
5) Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance.
6) Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.
7) The rubber vulcanizing press is beautiful in shape, rational in structure, convenient in control, safe and credible as well.
|Total Pressure (MN)||25T||50T||100T||160T|
|Platen size (mm)||350*350||400*400||600*600||600*600|
|Plate Distance (mm)||125||125||125||300|
|Working Layer NO.||2||2||2||1|
|Unit Area Pressure(Mpa)||2.04||3.13||2.77||4.4|
|Plunger Stroke (mm)||250||250||250||400|
|Motor Power (kw)||2.2||2.2||2.2||3|
|Overall dimension: (L×W×H) (mm)||1400×480×1380||1600×500×1480||1880×720×1680||2250×1200×2200|