In the coal conveying system, the rubber conveyor belt conveyor is the main equipment of the system, which runs through the entire coal conveying system, and for the belt conveyor, the belt is not only the bearing part of the conveying material, but also the traction of the conveyor. Therefore, the belt can be called a key part of the conveyor, that is to say, the quality of the belt will directly affect the normal operation of the entire coal conveying system.
During the operation of the coal conveying system, the belt removes the normal wear and tear, but it also often causes abnormal wear or damage, or even breakage, of the belt due to various objective factors or human factors. The economic loss caused by the replacement of the belt and the shutdown It is conceivable that the more serious ones will also cause casualties.
Therefore, for our operation and maintenance personnel, it is our duty to prevent accidents, minimize unplanned downtime, extend the service life of equipment parts as much as possible, and ensure the normal operation of the system, so Underground Mining Use Conveyor Belt Welding Machine Belt Splicing Jointing Machine with Anti-explosion Motor is very important.
Underground Mining Use Conveyor Belt Welding Machine Belt Splicing Jointing Machine with Anti-explosion Motor is mainly applied to industries for splicing and repairing conveyor belts such as metallurgy, mine, power plant, port, dock, construction material cement, chemical industry, tobacco, and food automatic line field.
1. Machine maximum size: from 650MM-2400MM;
2. Voltage: 380V 660V 480V 440V 415V 400V or 220V;
3. Fast cooling time: 5 minutes (from 145 degrees down to 70 degrees or less);
4. Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 50 minutes;
5. Vulcanizing pressure:1.8MPa (details refer to users’ specifications and factory markings);
6. Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;
7. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;
8. Make clear for model and specification of product and indicate width and tensile strength of rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when ordering products.
9. Users could order spare electric pumps additionally according to requirements.
||Heating Board Size