|Type:||Rubber Extruder, Rubber Strainer Extruder||Screw Diameter:||200mm|
|Driving Motor Power:||75kw||Cooling Water Pressure:||0.2-0.4Mpa|
|Capacity:||900-1500kg||Voltage:||380V 50HZ Or Customized|
75kw Hot Feed Rubber Extruder,
900kg Hot Feed Rubber Extruder,
1000kg/H Hot Feed Rubber Extruder
Saving Production Cost Hot Feed Rubber Straining Extruder with Auto Changing Filter Screen
It is widely used in rubber products such as cable industry, renewable rubber industry, inner tire industry and rubber pipe industry!
About rubber materials after mixing by rubber kneader, without the old process through mixing mill output strip and feeding old strainer, this new type strainer can directly feed clumps of block to double-pull feeding mechanism, using screw pushing, conveying, the mixed gum or removing the impurity in the mixed rubber and reclaimed rubber. Rubber products with different shapes can be extruded according to customer requirements.
The mixed compound through rubber kneader can be fed into the two-rotor strainer directly, not need to use the rubber mixing mill any more. Under the action of screw push and conveyor, theimpurities of reclaimed rubber will be removed. According to customer requirements it can extrude the strained rubbers into different shapes of rubber products.
1.Compared with the old process, reducing the use of a rubber mixing mill and one worker, the production cost is greatly reduced. And the feeding effect is good, the filtration ability is strong, greatly reduces the work intensity of worker, reduces the investment cost.
2,Adopt double heads with filter plate, and The filter screen is replaced by hydraulic push, and the operation is fast, not leaking, saving time and energy.
3,The rotation speed can be adjusted, which can match the speed of the equipment before and after, improve the utilization of resources, more safety and save energy.
4,Adopt hard tooth speed reducer special used on extruder, Lower noise and longer service life.
5,The machine barrel and screw are made of high quality alloy steel 38CrMoALA, which is treated with nitrification and abrasion resistance.
6,Equipped with automatic cutting rubber device to reduce the labor intensity of workers
|Length-diameter ratio of the screw||6:1||5.5:1||5:1|
|Max production capacity(kg/h)||600||1000||2000|