|Application:||Silicone Rubber Extruding Strain||Screw Diameter:||150mm|
|Feeding Method:||Two-rotor Forced Feeding||L/D Ratio:||6:1|
|Scrwe Speed:||49r/min||Production Capacity:||600kg/h|
silicone rubber extruder machine,
hot feed extruder
600kg/h Production Capacity XJL-150 Two-rotor Silicone Rubber Straining Extruding Machine
It is widely used in cable industry, reclaimed rubber industry, inner tube industry and rubber hose industry etc rubber profiles manufacturing.
The mixed compound through rubber kneader can be fed into the two-rotor strainer directly, not need to use the rubber mixing mill any more. Under the action of screw push and conveyor, theimpurities of reclaimed rubber will be removed. According to customer requirements it can extrude the strained rubbers into different shapes of rubber products.
Main technical parameter
1. screw diameter:φ150mm
2. ratio between length and diameter of screw: 6
3. screw type:dual head equal pitch and equal depth screw.
4. material of screw and barrel: 38CrMoAl, nitriding process, the depth of nitriding 0.8-1.2mm, hard chromium plating on surface
5. screw RPM:0~60r/min, screw is assembled on the hole of main shaft of gear box.
6. screw center height:800 mm
7. main motor:280S, 45KW, frequency conversion motor
8. speed regulation:frequency conversion
9. cooling water pressure:0.2Mpa
10. cooling water temperature:<20℃
11. reducer:280, hardened gear reducer
12. temperature regulation:water cooling device with head, body and screw center, temperature is digital display.
13. filter head:hydraulic head, auto hydraulic screen changing, cooling device
14. auto feed device: two feeding rotors and a feeding screw: 40Cr, hard chromium plating on surface; feed motor: 5.5KW, frequency conversion motor
15. capacity:500~600Kg/h(it depends on quality of silicone and dimension of screen hole)
Contact Person: Mr. LEE