||Splicing Rubber Conveyor Belt
|Host Body Material:
||Water Atuo Pressure Pump
conveyor belt joint press,
conveyor belt splicing equipment,
conveyor belt splicing machine
Portable Right-angle/Bias-angle Type Conveyor Belt Splicing Machine used for Splicing Fractured Conveyor Belt
Portable Right-angle Type Conveyor Belt Splicing Machine is mainly applied to industries for splicing and repairing conveyor belts such as metallurgy, mine, power plant, port, dock, construction material cement, chemical industry, tobacco, and food automatic line field
1. Machine Maximum size: from 300MM-2000MM,Or according the customer
2. Voltage: 220V 380V 415V 660V 50HZ;
3. Fast Cooling time: 15 minutes (from 145 degrees down to 70 degrees or less);
4. Time for temperature raise (from normal temperature to vulcanizing temperature) no more than 25 minutes;
5. The temperature difference of sulfide surface: ±2°c.
6. Temperature adjustment range: 0~300°c.
7. Vulcanizing pressure: 0~2.5 MPa (details refer to users' specifications and factory markings);
8. Time of heat preservation for vulcanizing could be adjusted according to thickness of the rubber belts;
9. Splicing length of rubber conveyor belt for vulcanizing jointing could be connected together by single or several pieces if necessary;
10. Rubber conveyor belt as well as tension in kilogram required for vulcanizing jointing when ordering products.
11. Users could order spare electric pumps additionally according to the requirements.
New technology water pressure bladder:
Electrical heating element:
Any of your your inquiry will get our high attention & prompt reply.