|Application:||Cooling Rubber Sheet||Total Power:||25~34kw|
|Material:||45# Steel Or Stainless Steel||Relay Brand:||Schneider|
batch off cooler,
rubber cooling machine,
batch off cooling machine
Hanging Rod Automatic type Rubber Compound Sheet Continuously Cooling Machine
Production Name: Rubber Sheet Cooling Machine, Batch off Machine
Application: Floor Standing Batch off Cooling Machine For Rubber Sheet is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.
1). There are two structure types: overhead and floor-standing types, whose hanging racks are vertically turning with compulsive cooling.
2). The rubber strip hanging bar adopts step by step cylinder or motor-reducer for driving.
3). The clients can choose high or low disposition according to the practical requirements.
4). The high dispostition batch-off line has hydraulic auto wig wag section, which can battle the rubber strip tidily, the strip tidy ratio≤100mm
5). There are three working positions for auto entering and outputting of material tray; auto rubber collecting device, auto cutter, it has high automatization and can realize nobody operating.
|Cooling Machine Model No.||XPG-600||XPG-800||XPG-900|
|Max. rubber sheet width||mm||600||800||900|
|The thickness of the rubber sheet||mm||4-10||4-10||6-12|
|Rubber sheet temperature over room temperature after cooling||C||10||15||5|
|Linear speed of taking-in conveyer||m/min||3-24||3-35||4-40|
|Linear speed of sheet hanging bar||m/min||1-1.3||1-1.3||1-1.3|
|Hanging height of the sheet hanging bar||m||1000-1500||1000-1500||1400|
|Number of cooling fans||Set||12||20-32||32-34|
1) The batch-off unit consists of mainframe and electrical control system.
2) The mainframe is composed of splicer, printing, slitter, isolation cooling, lifting device, hanging strip cooling, auto wig wag section, weighing, handrail, platform and supporting bracket etc..
3) The electrical control system consists of main control cabinets, and there are emergency stop device in key areas.
1. Our engineers can design target machines for you and send the drawing to confirm.
2. In the process of production, we will take photos and send to customers for you tracking.
3. Documents such as packing list, commercial invoice, and bill of lading etc. will be sent after the delivery.
4. We could supply free English foundation DWG, installation drawing, user guide, maintenance manual and part drawing.
5. We supply overseas technical support
6. Test Machine Before Delivery, you only need to connect the wires to the outside the control cabinet.